时效工艺对纳米结构2297铝锂合金力学性能与微观组织的影响

采用535 ℃×2 h固溶制度,将热锻态2297铝锂合金固溶水淬后冷轧,冷轧压下量为95%,然后将轧制样品在不同温度(120~190 ℃)和时间(0~80 h)范围内进行时效处理。采用拉伸、扫描电镜(SEM)和透射电镜(TEM)等测试方法,分析时效温度和时间对铝锂合金组织与性能的影响。结果表明:时效前的大塑性变形能获得纳米结构组织,能促进T₁相均匀细小地析出,缩短合金达到峰时效的时间,最终成功制备了高强高塑性铝锂合金。在120~140 ℃温区内时效时,时效温度越高,达到峰时效的时间越短、强度越高。140 ℃达到峰时效时间缩短为40 h,此时合金的抗拉强度、屈服强度和伸长率分别为525 MPa、478 MPa和7.7%,主要强化相为细小的T₁相。在170~190 ℃温区内时效时,时效温度越高,达到峰时效的时间越短,但抗拉强度与屈服强度迅速下降。170 ℃时效8 h达到峰时效状态,此时合金的抗拉强度、屈服强度和伸长率分别是503 MPa、462 MPa和5.0%,主要强化相仍为T₁相,但已经明显粗化。     

Automatic sorting of fresh tea leaves using vision-based recognition method

Mechanical tea harvesting using plucking machines is highly efficient, but harvested raw fresh tea leaves (FTLs) are always low quality because they contain a mixture of old leaves and leaf debris. To address this problem, this study developed an automatic sorting machine with a vision-based recognition method to extract high-quality FTLs from plucked raw FTLs. First, the raw FTLs were separated one by one after passing through three sequential conveyor belts with increasing speed, and were then classified into four grades using a vision-based recognition method. Finally, the FTLs were blown by air nozzles into collection boxes according to their specific grade. In the recognition method, the shape-based feature of each FTL is extracted by establishing the FTL's topological structure, and the support vector machine model is used for classification. The experimental results revealed that the vision-based recognition method performed satisfactorily with an accuracy rate of 94% and precision rate of 85%. The sorting success rate and efficiency of the automatic sorting machine were approximately 80% and 15 kg hr⁻¹, respectively. The results indicate that the developed automatic sorting machine can effectively and efficiently sort raw FTLs, which may improve the profitability and promote the automation of tea processing.     

Electron beam processed surface textures on titanium alloys for fluid-drag reduction

Ti-6Al-4V and Ti-4Al-1.5Mn alloys were employed for electron beam processing with the aim to produce surface textures efficient for fluid-drag reduction. The as-resulted surface textures were examined by using advanced optical microscopy for surface morphology analysis, optical microscopy and scanning electron microscopy for near-surface microstructure observation. The titanium model with electron beam processed surface textures was tested in wind tunnel to evaluate their fluid-drag reduction efficiency. It showed that the as-resulted non-smooth surface was characterized by parallel ridges and grooves, with height and spacing able to be customized by adjusting processing parametres. The ridges displayed continuous scales while the valley of grooves presented V-shaped ripples. Their dimensions were also related to and could be controlled by processing parametres. Further, the near-surface region was occupied by fusion zone, heat-affected zone and base metal from the outermost surface to the underlying bulk alloy. The microstructure of fusion zone was characterized by martensite phase. A heat-affected zone was sandwiched between fusion zone and the underlying base metal, with different microstructural features compared to both fusion zone and the base metal. With respect to fluid-drag reduction efficiency, titanium model with electron beam processed surface textures exhibits a reducing efficiency over 15% at attack angles of 0° and ±1°, with an air flow velocity at 24 m/s.     

Complementary doping of van der Waals materials through controlled intercalation for monolithically integrated electronics

Nano Research - Doping control has been a key challenge for electronic applications of van der Waals materials. Here, we demonstrate complementary doping of black phosphorus using controlled ionic...     

一种新型回路电阻测试仪的研究与设计

针对传统低压回路电阻测试仪只能在被测设备停电时使用的一大限制,本文提出并设计了一种新型低压回路电阻测试仪。该仪器可在低压设备运行状态下对其回路电阻进行测量,在保证测量精度的前提下减少了设备停电率,大大提高了工作效率。     

攀西地区白马辉长岩型超低品位钒钛磁铁矿选铁试验研究

论文以攀西地区白马辉长岩型超低品位钒钛磁铁矿为研究对象,查明了该矿石中化学组分、矿物组成、铁和TiO₂的相态。在此基础上进行了多粒级多磁场梯度干式磁选抛尾试验,通过铁和TiO₂的相态分析阐述了干式磁选抛尾的合理性；进行了干式磁选精矿阶段磨矿阶段选别试验,二段磁选在-200目占80%细度下获得了TFe 57.78%、TiO₂ 7.72%、V₂O₅ 0.69%的铁精矿,铁精矿产率为12.93%、铁回收率51.56%,相对磁性铁回收率为98.70%,V₂O₅回收率78.26%。结果表明该矿石虽然铁品位低,仍具综合回收利用价值。      

我国石墨资源、市场与技术现状及发展趋势

为促进我国石墨资源开发利用产业的健康发展，在介绍了我国石墨资源的分布与市场供需情况的基础上，分析了当前石墨矿选矿技术的特点，矿物加工过程中存在的问题，指出了石墨选矿技术的发展趋势及方向。     

Efficient atom localization via probe absorption in an inverted-Y atomic system

The behaviour of atom localization in an inverted-Y atomic system is theoretically investigated. For the atoms interacting with a weak probe field and several orthogonal standing-wave fields, their position information can be obtained by measuring the probe absorption. Compared with the traditional scheme, we couple the probe field to the transition between the middle and top levels. It is found that the probe absorption sensitively depends on the detuning and strength of the relevant light fields. Remarkably, the atom can be localized at a particular position in the standing-wave fields by coupling a microwave field to the transition between the two ground levels.     

Time-Resolved Structural Kinetics of an Organic Mixed Ionic–Electronic Conductor

The structure and packing of organic mixed ionic–electronic conductors have an especially significant effect on transport properties. In operating devices, this structure is not fixed but is responsive to changes in electrochemical potential, ion intercalation, and solvent swelling. Toward this end, the steady-state and transient structure of the model organic mixed conductor, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), is characterized using multimodal time-resolved operando techniques. Steady-state operando X-ray scattering reveals a doping-induced lamellar expansion of 1.6 Å followed by 0.4 Å relaxation at high doping levels. Time-resolved operando X-ray scattering reveals asymmetric rates of lamellar structural change during doping and dedoping that do not directly depend on potential or charging transients. Time-resolved spectroscopy establishes a link between structural transients and the complex kinetics of electronic charge carrier subpopulations, in particular the polaron–bipolaron equilibrium. These findings provide insight into the factors limiting the response time of organic mixed-conductor-based devices, and present the first real-time observation of the structural changes during doping and dedoping of a conjugated polymer system via X-ray scattering.